FaultyPrints 2014: Misprint removal from PVC or PUR cable before inline reprinting – reliable and consistent
  • HELICORD® technology provides high process safety
  • Minimum amount of solvent required by use of multiple precise metering outlets in the process zone
  • Can be set up in-line with reprinting
New Welding Test Unit 2013: New Welding Test Unit

This welding wire test unit allows test welding under controlled and repeatable conditions.

Click here for further Information

default-pic 2012: Welding Wire Finish HELICORD® W – NB37F001

Impregnated braided cords for removal of loose particles and simultaneous application of additives to improve feedability, corrosion protection and arc stability.
HELICORD® W are flat textile cords containing yarns that are impregnated with extractable materials for welding wire finishing.

The extractable materials are used as finish for the wire surface, with the exact kind of material and quantity being adjusted to the different requirements of various types of welding wire.

They improve the properties of welding wires with respect to feedability, corrosion resistance, welding properties and arc stability. HELICORD® W was designed for application by HELICORD® process supported by use of an extraction liquid. Herein, they differ from the wax and additive oversaturated earlier developments (NB35V00x) which are extractable by heat and friction. The special advantage of HELICORD® W is the possibility of running them opposite to the wire run direction, due to liquid extraction. Thus, loose and loosely adherent particles and scales from the drawing process or other preceding process steps are thoroughly removed. This improves the properties of welding wire regarding life time of the liner and contact nozzles. For application of HELICORD® W products, the HELICORD®-machine models NB57 and NB58 or especially NB57W and NB58W (process zone follows the traverse of the winder) are required.

RollSupport 2012: New Roll Support in Looping Unit Minimizes Wear and Tear in HELICORD® Machines

Due to the new design of the roll support the wire does not touch the rolls running at rather slow cord speed and the surface cannot be damaged.

default-pic 2011: Welding Wire Finishing

Publication presented at AWS Welding Show 2011

On Nov 17, 2011, Michaela Boockmann gave the paper “Wrapped Textile Cord Processing for Welding Wire” on Welding Wire Finishing at Fabtec International. This paper, which was received with great interest, can now be found online here.

Fibreoptic 2011: HELICORD® used for intercontinental fiber optic cable

In a project with high future potential in the field of highly available long-distance data transmission and communication, HELICORD® is used for cleaning the copper jacket before extrusion of submarine fiber optic cables for bridging intercontinental distances.

default-pic 2011: Inauguration of Hall 3 at the Production Facility in Steinach

Boockmann GmbH is pleased to inform it’s customers and suppliers that another hall at the production facility in Steinach was completed. The new hall is used exclusively for production of textile and liquid consumables.

default-pic 2009: Development of Oil-Based Welding Wire Finish

for bare & copper-plated steel wire
Our welding wire finish considerably improves feedability as well as corrosion protection. Additives can prevent discoloration of copper wire. When using this finish together with our HELICORD technology, it is possible to additionally clean the wire from adhering particles, which improves the quality of the wire.